Make our 9 Foot Tall Hanging Crystal Columns stand alone with our Aluminum Riser Stand Kits. Sometimes venues would prefer that you not hang from their ceilings, so we're answering that call! This carefully created kit will allow you to use our popular Hanging Columns as a freestanding decoration without the fear of having them tip-over. Safety is a huge concern for all event planners, and we've taken special precautions to select the best kits for each size Column.

Included in Kit: (comes in 2 boxes: pole box is 54x4x4", base box is 15x17x1") 

• 1 Pole: 9 Feet Tall Professional Pipe and Drape Annodized Aluminum
• 1 Black Powder Coated Base 14" x 16" (Don't settle for cheap metal silver bases. They make a mess on your hands, clothes, floors!)
• 1 Pin 6" Long to hold the base and the pole - this will be stored inside of the pole when it arrives (Tap pole without bright silver piece on it) Once you have Pin unscrew the screw in it and screw it to the base)
• 1 Set of ShopWildThings Crossbars to hold your columns in place. 

This stand is Professional Quality and will withstand heavy use. This item designed to hold columns and chandeliers stationary. This item is not designed to hold a dancer. 

You will get a fixed height upright that is 9 Feet tall, a heavy black powder coated base that's 16" x 14", a 1.5" wide by 6" tall pin (for the ultimate in stability for the 9 foot columns), and our patent pending Column Cross-bar system that we've developed especially to hold ShopWildThings columns on top of these risers. 

If you have purchased Columns from us seperately and they have a crossbar in them, the crossbars in your column will need to be cut out. Check your current column stock. We also sell columns with NO crossbars. If you have questions, call us at 928-855-6075 or email help@shopwidlthings.com. These are easy to use, don't worry about overcomplicating them. 

We have carefully chosen the parts in this kit to be easy to use, very heavy-duty, and to last event after event. The bases and pins are designed to easily support the weight of our Crystal  Beaded Columns.

The upright is ultra-strong anodized aluminum and 1.5" in diameter on the outside. The height is fixed.

To hang our Columns on top of this riser, use our Patent Pending Cross-Bar system on the top. We'll send installation instructions and photos with your order. The outside ring of your Round OR Square Column will fit perfectly into this holder for the ultimate stability.

PLEASE NOTE: This product does not include the Crystal Column. Please see the Shipping information at the bottom of this page. If you have ALREADY purchased a Crystal Column from us before ordering this item, you'll need to cut the cross-bars out of the center to make this riser work with it. It is very easy with a small Dremel tool or similar. If you're purchasing a Crystal Column at the same time that you are purchasing this Freestanding Riser, we will cut the center out of the Crystal Column     for you before shipping it all out.