Height Adjustable Floral Wedding Arbor "Ansley" White for Balloons, Florals, Hanging Lights Height: Adjusts from 5 Feet to 9 Feet 10 Inches Length: 5.25 Feet Depth: 21.5 Inches Be sure to click on the green READ MORE button below!
Walking into a room filled with glorious hanging flower garlands and draping greenery vines is absolutely breathtaking, creating a lasting impression, and with our Gold Wedding Arbor "Ansley", that elegant vision just became reality! With a top and bottom frame, this height adjustable arbor is designed to fit on a tabletop but displays equally well on the floor. Both frames are 5 1/4' long by 21 1/2" deep and the minimum height is 5' tall. There are 4 extendable legs to raise the top frame up to 9' 10" tall! The metal tubing is 3/4"wide and the top frame also has a middle bar for additional hanging surfaces. If you need a longer or wider arbor, simply place 2 side by side.
The decorating possibilities with this arbor are so plentiful that it's hard to describe and with Magnet Hooks and floral wire, virtually any type of Floral Element can adorn this frame to create aerial fabulousness! Cascading flower or greenery sprays with stems are a cinch to attach as well as flexible or bendable wire garlands and our Flower and Greenery Wall Mats are a perfect fit for this frame. Manzanita branches add dimension and texture and you can't beat the look and romance of hanging glass candle holders or twinkling fairy lights. Luxurious draping tulle, fluttering butterfly garlands, sparkling crystal beaded garlands, hanging spheres and even a lightweight chandelier add to the blissful effect.
If using on a tabletop, be mindful of the height you choose in conjunction with the weight of materials you're adding on. This is why we suggest no higher than 9' 10". If using on the floor, due to the bottom framework, be sure to place this arbor in a non-traffic area.
Assembly Tips: The frame without a middle bar is the bottom piece and the legs with a connector plate on 1 end and a screw on the other end are the bottom legs.
Place bottom frame on floor, remove the cap nuts and tighten down the bottom legs.
Remove the screws from the top of the bottom legs and slide in the upper extension legs.
Remove the cap nuts from the top frame, place on the upper leg connector plates and tighten.
Extend the arbor upwards and when desired height is reached, tighten down the upper legs.